VEVOR Welding Table 36 by 18 inch, 1200 lb, on WheelsBest overall- Top size
- 36 by 18 inch
- Load capacity
- 1200 lbs
- Fixture holes
- 94 holes, 5/8 inch
- Tool slots
- 4
Most recommended by reviewers
Check price at AmazonThe Best Welding Tables
We earn a commission when you buy through our links, at no extra cost to you. How this works.
Clamping your work to a sawhorse and hoping it stays still is frustrating. A welding table gives you a flat, sturdy surface with holes and slots to hold your pieces in place. Tables range from small fold-up stands to heavy rolling benches, so the right one depends on your work and your space.
Our top pick is the VEVOR 36 by 18 inch rolling table. It is rated for 1200 lbs, has 94 fixture holes and lockable casters, and suits most home garage and hobby welders. Here is what's available right now, including folding models, lower-cost options, tilting tops and tables with edge guide rails.
The rundown
1 VEVOR Welding Table 36 by 18 inch, 1200 lb, on Wheels | 2 WORKESS Folding Welding Table 42 by 21 inch, 1000 lb | 3 CAMMOO 1200 lb Welding Table 36 by 18 inch | 4 Olympia Tools Adjustable Welding Table 30 by 20 inch | 5 VEVOR Foldable Welding Table 30 by 20 inch, 400 lb | |
|---|---|---|---|---|---|
| Best for | Best overall | Best folding table | Best budget rolling table | Best tilting top | Best with edge guide rails |
| Top size | 36 by 18 inch | 42 by 21 inch | 36 by 18 inch | 30 by 20 inch | 30 by 20 inch |
| Load capacity | 1200 lbs | 1000 lbs | 1200 lbs | Not listed | 400 lbs |
| Mobility | Casters with brakes | Not listed | 3 inch swivel casters that lock, plus 4 fixed glides | Wheels and carry handle | Two legs with wheels |
| Height range | Not listed | 27.7 to 36.6 inches, 7 levels | Not listed | Adjustable | 25 to 32 inches |
| Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon | Check price at Amazon |
VEVOR Welding Table 36 by 18 inch, 1200 lb, on WheelsBest overall
WORKESS Folding Welding Table 42 by 21 inch, 1000 lbBest folding table- Top size
- 42 by 21 inch
- Top material
- 14 gauge galvanised metal
- Load capacity
- 1000 lbs
- Height range
- 27.7 to 36.6 inches, 7 levels
CAMMOO 1200 lb Welding Table 36 by 18 inchBest budget rolling table- Top size
- 36 by 18 inch
- Load capacity
- 1200 lbs
- Top
- Cold-rolled steel, 2.8 mm thick, black oxide and anti-rust coating
- Legs
- 3.5 mm steel
Olympia Tools Adjustable Welding Table 30 by 20 inchBest tilting top- Top size
- 30 by 20 inch
- Top
- Zinc-plated steel with clamp adjustment slots
- Top position
- Tilts, or folds flat
- Height
- Adjustable
VEVOR Foldable Welding Table 30 by 20 inch, 400 lbBest with edge guide rails- Top size
- 30 by 20 inch
- Load capacity
- 400 lbs
- Tilt angles
- 0, 30 and 90 degrees
- Slots
- Three 1.1 by 22 inch slots
1Best overall
VEVOR Welding Table 36 by 18 inch, 1200 lb, on Wheels
A rolling steel bench with plenty of clamping holes, built for home garage and hobby welding.
- Top size
- 36 by 18 inch
- Load capacity
- 1200 lbs
- Fixture holes
- 94 holes, 5/8 inch
- Tool slots
- 4
- Mobility
- Casters with brakes
- Frame
- Carbon steel
- Storage
- Tool tray
Most recommended by reviewers
Check price at AmazonPrices and availability on Amazon change often.
Why it wins
- High 1200 lb rating for a table this size
- 94 fixture holes and 4 tool slots give many clamping positions
- Locking casters let you roll it away and hold it steady
One catchThe 18 inch deep top is narrow for large workpieces.
Why it's our top pick
The VEVOR 36 by 18 inch table is the best all-round choice for a home or hobby shop. It pairs a 1200 lb rated carbon steel frame with 94 fixture holes at 5/8 inch and four tool slots, so you can clamp work down in many positions. Braking casters let you roll it out of the way, then hold it still while you weld.
A tool tray keeps clamps and pliers close. Welders often advise spending on clamps and consumables rather than a premium fixture table, and this one covers the basics. For bigger jobs with larger workpieces, a larger and more robust table is the better call.
2Best folding table
WORKESS Folding Welding Table 42 by 21 inch, 1000 lb
A larger top that folds down to 3.7 inches high for small garages and shared spaces.
- Top size
- 42 by 21 inch
- Top material
- 14 gauge galvanised metal
- Load capacity
- 1000 lbs
- Height range
- 27.7 to 36.6 inches, 7 levels
- Folded height
- 3.7 inches
- Clamping
- 0.8 inch holes and multiple slots
Prices and availability on Amazon change often.
Pros
- Bigger 42 by 21 inch top than the rolling 36 by 18 tables
- Folds to 3.7 inches high, stands on its own and has handles
- Seven height settings and four locking hooks for security under load
Cons
- No casters listed, so you carry it by the handles
- Rated load is below the 1200 lb rolling tables
Read our full take
Why we like it
The WORKESS is our pick if you need a table you can put away. The legs tuck under the top so it folds to 3.7 inches high, stands on its own and has handles for carrying. The 42 by 21 inch top is 14 gauge galvanised metal with 0.8 inch holes and slots for clamps, and the table is rated for 1000 lbs.
Seven height settings from 27.7 to 36.6 inches let you set a comfortable working height. Four locking hooks add security when the table is loaded.
3Best budget rolling table
CAMMOO 1200 lb Welding Table 36 by 18 inch
A rolling table with the same headline specs as our top pick, from a lower-cost brand.
- Top size
- 36 by 18 inch
- Load capacity
- 1200 lbs
- Top
- Cold-rolled steel, 2.8 mm thick, black oxide and anti-rust coating
- Legs
- 3.5 mm steel
- Fixture holes
- 94 holes, 5/8 inch, plus 4 tool slots
- Mobility
- 3 inch swivel casters that lock, plus 4 fixed glides
- Assembly
- No tools required
Prices and availability on Amazon change often.
Pros
- Matches the top pick on size, load rating and clamping holes
- Lockable casters plus fixed glides for steady precision work
- Dual-sided tool tray and tool-free assembly
Cons
- The 2.8 mm top is thin, and welders on forums say thicker tops warp less
- Same narrow 18 inch depth, and it does not fold
Read our full take
Why we like it
The CAMMOO is the budget pick for anyone who wants a rolling table without paying for more. It lists a 36 by 18 inch cold-rolled steel top with 94 holes at 5/8 inch, four tool slots and a 1200 lb rating. Swivel casters lock for work and fixed glides keep it steady.
The top is 2.8 mm thick. Welders advise that thicker plate resists warping, so this suits light to medium work rather than heavy bead building.
4Best tilting top
Olympia Tools Adjustable Welding Table 30 by 20 inch
A compact wheeled table whose top tilts for angled work and folds flat for storage.
- Top size
- 30 by 20 inch
- Top
- Zinc-plated steel with clamp adjustment slots
- Top position
- Tilts, or folds flat
- Height
- Adjustable
- Mobility
- Wheels and carry handle
- Storage
- Tool tray
Prices and availability on Amazon change often.
Pros
- Tilting top angles the work for easier access
- Folds flat when not in use
- Wheels and a carry handle move it with tools in the tray
Cons
- The listing gives no load rating
- Smaller 30 by 20 inch top
Read our full take
Why we like it
The Olympia Tools table suits welders who want to angle the work rather than bend over it. The zinc-plated top has slots for different clamps and tilts to present the weldment, then folds flat for storage. Height is adjustable, and wheels and a carry handle let you move it with tools still in the tray.
The listing gives no load rating, so keep it for lighter work.
5Best with edge guide rails
VEVOR Foldable Welding Table 30 by 20 inch, 400 lb
A compact foldable bench with three tilt angles and retractable rails for holding work hands-free.
- Top size
- 30 by 20 inch
- Load capacity
- 400 lbs
- Tilt angles
- 0, 30 and 90 degrees
- Slots
- Three 1.1 by 22 inch slots
- Guide rails
- Three retractable vertical rails
- Height range
- 25 to 32 inches
- Mobility
- Two legs with wheels
Prices and availability on Amazon change often.
Pros
- Three retractable guide rails work as edge guides, stops or clamps
- Three tilt angles, 0, 30 and 90 degrees
- Long slots let you place clamps almost anywhere on the top
Cons
- 400 lb rating is the lowest in our rolling and folding picks
- Height tops out at 32 inches, which may be low for taller welders
Read our full take
Why we like it
This VEVOR is for welders who want the table to hold the work. Three retractable steel guide rails act as edge guides, stops or clamps, and three 1.1 by 22 inch slots take clamps nearly anywhere on the top. The top sets to 0, 30 or 90 degrees, and wheels on two legs let you move it.
The 400 lb rating and 25 to 32 inch height range fit light fabrication and repair work.
FAQ
What should you look for in a welding table?
- Top size and thickness. Welders on forums say a thicker top resists warping, and that a table needs bracing underneath to prevent sagging, whatever the top thickness.
- Rated load. Our picks range from 400 to 1200 lbs. These are manufacturer ratings, so choose one that comfortably covers your heaviest workpiece.
- Fixture holes and slots. These are what let you clamp work down. More holes mean more setups.
- Stability. Locking casters or adjustable feet help the table sit level and still.
- Fixed or folding. Fixed rolling tables are the sturdier choice. Folding tables save space but give up some rated load.
Which table fits you?
Home garage or hobby welders are well served by the VEVOR 36 by 18 inch or the CAMMOO. Small spaces call for the WORKESS or Goplus, which fold away. Angled or hands-free work suits the Olympia Tools or the VEVOR 30 by 20 inch with guide rails. If you work on large, heavy pieces, a larger, heavier-duty table than anything here is the better investment.
What should you skip?
- Precision fixture tables, until you need repeatability. Welders point out that these are more about speed and repeatability than necessity for one-off garage work, and advise putting the money into clamps and consumables first.
- Any table with a rating below your heaviest workpiece. One portable panel-style station we saw is rated for only 66 lbs, so it is a spark shield rather than a workbench.
- Relying on a table as a vise. Even a well-reviewed fixture table won't replace a good bench vise.
What is the best material for a welding table?
Steel. Every table in this guide uses carbon steel or galvanized steel, and welders on forums say an ordinary steel plate table does the job for beginners. For heavy use, a sacrificial aluminum or thick steel top placed over the table can help spread heat and limit warping.
What is the best thickness for a welding table top?
Welders on forums suggest a 1/2 inch top over 1/4 inch for a homemade plate table, because the thinner plate warps over time. Whatever the thickness, add structural stringers underneath to prevent sagging. Ready-made tables like those here use thinner tops, such as CAMMOO's 2.8 mm desktop, so they suit light to medium work.
Which welding table is better, the Vevor or Harbor Freight?
They are different kinds of table. The Harbor Freight Titanium 36 by 24 inch modular table has a precision-ground 6 gauge flat steel top, CNC-machined slots for blocks and clamps, a fit-up kit and a 600 lb working load. The VEVOR tables here use fixture-hole tops with ratings up to 1200 lbs, plus wheels or folding legs. Choose Harbor Freight-style for fit-up work, and VEVOR for mobility and load rating.
Is the Harbor Freight welding table any good?
One review called the Harbor Freight Titanium modular table good value and said it is worth buying even if you rarely weld, since it also works as a work-holding surface. The same review found it a bit small, thought the included clamps were not the best, and would not use it for heavier-duty work. It needs assembly, and the retailer lists it as an oversized item that can't ship to Alaska or Hawaii.
What is the best welding table for beginners?
The VEVOR 36 by 18 inch table is our pick, since its fixture holes are already drilled and its casters let you move it around a small garage. Welders on forums said pre-drilled holes make a beginner table appealing, and that an ordinary steel plate table works fine to start with.
Why trust BullseyeBuy
How we made this guide
- 10 welding tables compared
- 10 Amazon listings checked for stock
- 3 buying-advice sources weighed
This shortlist compares ten Amazon listings on top size, rated load, fixture holes, mobility and storage. Every table is in stock now, and the advice on what matters comes from an expert review, a welders' forum thread and a retailer listing for a comparable table.
Our expert team tests products when it is needed and researches online and in interviews. Every guide is fact-checked and edited by a real person.
The BullseyeBuy editorial team · Updated Oct 17, 2026
Checking our work: 10 sources
- Welding Tips and Tricks forum: best welding table for beginner
- VEVOR Welding Table 36 by 18 inch, 1200 lb, on Wheels
- WORKESS Folding Welding Table 42 by 21 inch, 1000 lb
- CAMMOO 1200 lb Welding Table 36 by 18 inch
- Olympia Tools Adjustable Welding Table 30 by 20 inch
- VEVOR Foldable Welding Table 30 by 20 inch, 400 lb
- Amazon: Goplus Portable Welding Table 42 by 21 inch
- Amazon: VEVOR Welding Table 36 by 24 inch, 800 lb
- Amazon: VEVOR Foldable Welding Table 44 by 21 inch
- Amazon: YESWELDER Foldable Welding Table
How we pickEditorial standardsAffiliate disclosureReport a mistake
We earn a commission when you buy through our links, at no extra cost to you. It never decides the winner.
